Nice weather, although intermittent, has me motivated.
By nice, I mean sun and low to mid 40's.
The 283 got a little noisy at the end of last season.
So off the my personal junkyard we went.
What we thought was a 327 in a 1966 C60, turned out to be a 1979 350, dressed up in drag.
Valve covers and intake off a 327.
So the C60 had had a heart transplant (long block) out of another truck sometime after 1979.
Well first plan was to crack it open and see what I am dealing with, and then decide, do i rebuild the 283, or the 350, or make the 350 a 327, or just stuff in the 350.
I cracked open the beast and to my surprise she is super clean.
Definitely low miles, seemed to be storing the oil on the outside, probably due to incorrect PCV setup by using intake and covers off PCV 327 engine on the later non PCV block.
After some scraping and scrubbing she will get new gaskets all around, except head, new cam, shorty headers and the TriPower off the 283.
Now it's time to decide on looks.
Paint grey and use all the grey stuff off the 283. (including stickered valve covers)
Paint Alpine Green and sticker as a 327 ? (Factory Truck engine color for 327) see remnants of green on original 327 valve covers under the blue.
Paint orange and sticker as a 350 ?
OR since the truck has Patina paint, slap some clear over the blue multi colored patina engine, and slap it in ????
Here is the current setup to ponder before giving your opinion.
Thanks for looking and commenting.
The Blue motor will either end up looking like the grey or something, detailed to a similar level, Or since the truck has Patina paint, maybe leave it multi colored and slap some clear on it.
I can't decide.
Boy the outward appearance of that motor had me scratching my head but it sure betrays what Iam seeing in the lifter gallery pan off Iam sure will be the same as far as paint JMO that grey Motor looks great nestled in that fine old American Pickup whatever you decide the look of the truck will be outstanding heck I would take that grey motor and put it in my mancave as is masterpiece of early V8 techno but Iam a sucker for multi carb setups just too cool why have one when more can be had,look under the hood of my Grand Cherokee Hemi and see enough plastic to vinyl side a dog house looking under the hood of your truck AHHH jewelry.Cheers R
Man talk about timing Nitro yesterday the wife and I are out snowmobiling and today its 50 degrees melt down has begun tonight/tomorrow rain and 50 ish today packing away sleds and snow shovels making sure the Vette has a clear shot at the door two days of rain will wash the salt off the hwy maybe just maybe pull the old pile out on the weekend for a short ride fingers crossed.R
We had 60, paint was drying on the brush.
Was able to get a bit done.
70 today but no sun.
Next week back to 30's.
Enjoy while you can, I am on a dirt road, so it is a muddy mess with this warm weather.
Nitro surfin the past forum postings I see a rather unique looking huffer in your post off a Jimmy "D" what are your plans for that weapon Iam very intrigued and have a passion for forced induction,although I play with turbo,s nothing on the planet screams insanity like the wine of a blower comin down the street and looks alone drive me crazy.Cheers Rob
I was planning on building it and putting it on a 327 or 427.
They key was to keep it under the hood, and have a bit of a sleeper.
Unfortunately had to put my Mother in a medical facility, so toy money is on hold for awhile.
Was going to feed it with Weber DCOE side drafts.
For your viewing pleasure.
I hear you there Nitro all the planning for my retirement the one thing not taken into consideration was assisted living facility's for my parents and the costs involved not to be non feeling but growing up my experience was my grandparents lived in their own home and passed at for the most part a earlier age in their seventy's people living longer today and more issues with Alzheimer's its old folks homes and not wanting them in some government assisted institution the cost was totally unbelievable and soon chewed thru their savings and the house sale the time it was said and done it left a fair size dent in our savings just nothing I had foreseen it didn't happen to my parents so I had nothing to draw on for planning ahead.All in all of course I would not have done anything different for them but I have tried to instill in the next generation to be prepared here private care runs in and around 3 K a month for a single.Rob
Some more progress.
Camel hump heads installed. ( they are redone with SS valves, seats and 0.575" springs, pushrod guides.) $1400 worth of machine shop time and parts.
Cam arrives today.
M/T covers just to keep stuff out of motor.
Thumb out?? Thumbs up from me. I was planning on the same thing this winter but the slab, 24x24, and add on to my shop turned into a hay barn. It was supposed to be the motor - Xmission room but dry hay for the cattle took first place. We have also had a car show in December, January, and two so far in March here in south Alabama that has kept us busy. Also hurricane ZETA tore us new ....well you know....where your thumb reference almost mentioned. I'll attach pics on the motor project as soon as possible. Small Block Ford 260 ci that is original to my 64 Falcon Futura hard top. I'm running a 289 ci now. I wanted to rebuild this motor over the winter but it didn't work out. It'll prolly go the machine shop in the next week or so for a good hot acid bath and maybe a bore if necessary. Again, Kudos on your work and your Mom is on our prayer list. As I type this note the weather here is humid and 78 deg.
@NITRO450EXP one step forward today the Vette off of blocks and out of the shop fresh tank of good juice sittin lumping away out in the driveway roads are dry yea bit O sand/salt here and there it would bother me if I were 30 something but the car will likely outlast me LOL the wife and I are going for our first short cruise of 2021 this aft cold air the rat likes and overheating issues non existent in the low 40,s March 16th gotta luv that I do live on a paved secondary rd so no mud other then the driveway juice so plug officially removed still work to be done but lots of rainy days for that.R
Hey Nitro, We feel your pain. I have lost both my parents and sibling. My parents both expired in nursing homes. We were working at the time and could not take them in. My wife, sons and grands are all good to go. My father in law is 90 now and currently in Hospital (cardiac and circulation issues.) We are retired and able to keep him home unless he needs serious attention. Well enough of that! I will try to post some pics of my next engine project. I miss spoke when I said it was a 260 that was original to the car but not with the car. My car was delivered from ford with a 260 but I bought it with the current 289. After reading your post I went out to the shop for pics and got the numbers off the engine. It turns out to be another 289! I should have looked it over better when I bought it. Oh well. Such is life and this insane hobby we have. Hang in there Pard.
Mail Call today.
Cam, lifters and double roller, CHECK
HV oil pump, pickup and driveshaft, CHECK
Second MF SS Straight through muffler, CHECK
Correct one piece Felpro oil pan gasket, CHECK ( I bought a gasket set for a '79 350, but they had reused the '66 327 pan so wrong timing cover to oil pan seal, thick type on 350 thin type on 327.
Now waiting on my Break in oil, 2" SS mandrel bent dual exhaust builders kit. DUE Tomorrow
SHOULD BE A PRODUCTIVE WEEKEND.
You got it goin' on man! I think I'll hold off on my spare motor for now. What I'm runnin' still has plenty of HP, no smoke, perfect oil pressure etc... It's just knowing I didn't build it that keeps me wondering just how good it really is and the fact that my engine and engine bay need to be detailed. I've also scored a decent C4 xmission that I want to swap for the current Ford-O-Matic. This is what I hope turns into a kick a-- SBF. As you can tell i'm no subject matter expert when it comes to computer ops. Hang in there. Can't wait to see the end result.
@NITRO450EXP Your posts have got me motivated spring has hit here with a pop near 60 degrees today,Iam not to familiar with that year and model of your ride and unsure if what Iam looking at on the upper firewall pass side is it A/M air Factrory air or is that where the heater core is placed.R
Had a little set back, the Alternator bracket off a C3 Vette, head mount for tube headers, was so twisted the alternator was pointing into space, second hand ebay parts sometimes are a bust. Guy is sending me another, but I am stalled for now.
Well it runs.
Cam is broke in.
Two remaining issues:
1. Need to build a PCV system as the newer block does not like the non vented script valve covers, really wanted to keep them because they are a big visual part of the engine. New vented covers will get same grey paint and script stickers. Amazon lost my package of PCV bits and pieces, so I am delayed right now.
2. The old Ram's Horns exhaust had a heat riser pipe, new headers do not, so need to convert heat riser choke to manual or electric. Still investigating options.
The side effect of the PCV is a little bit of smoke when the oil haze gets injected into carb, hope the new system alleviates this.
If it doesn't then rings may be worse than i hoped, may have to rebuild the bottom end.
It never ends.
I guess it keeps me out of the bars.
I am sure the new covers will be close enough with the right paint and decals. That's kind of a bummer, but it's also not the end of the world. PCV systems are kinda important to have.